👷MQTT (WIP)
MQTT (Message Queuing Telemetry Transport) is a lightweight, publish-subscribe network protocol that transports messages between devices. Designed for constrained environments, it is ideal for machine-to-machine (M2M) or Internet of Things (IoT) scenarios. MQTT operates over TCP/IP and aims to be simple and efficient, ensuring high performance and reliability even on low-bandwidth networks.
In MQTT, topics are used to filter and direct messages between clients. A topic is a string, typically representing a hierarchy, that defines the destination of the message. Topics are case-sensitive and use a forward slash (/
) as a delimiter to create levels of hierarchy. For example, home/kitchen/temperature
and home/livingroom/humidity
are distinct topics.
Creating an MQTT instance
Creating an MQTT instance
The create
function creates an MQTT instance with which a client connection to an MQTT broker over an arbitrary transport method (TCP, TLS, WebSocket, ecc) can be created. The MQTT client automatically handles the following:
Regular server pings
QoS flow
Automatic reconnections
Start publishing before being connected
Simply drag the create
function onto the board, name your instance and trigger.
Deleting an MQTT instance
Drag the delete
function onto the board, insert the name of the instance to be deleted and trigger it.
MQTT functions
connect
With the connect function, you can connect the MQTT instance to a broker.
To create the connection, drag the connect function onto the board. Insert url: {url}
into the url field, where you replace the curly brackets and their content with your URL. The following protocols are supported: mqtt
, mqtts
, tcp
, tls
, ws
, wss
, wxs
, alis
.
Then, in the second input field, add options: {}
as the main key and insert the following parameters in object format in the brackets as needed.
Parameter | Type | Default | Description |
---|---|---|---|
username | String | The username required by your broker, if any. | |
password | String | The password required by your broker, if any. | |
wsOptions | Object |
| Specific options for WebSockets. Have a look at: https://github.com/websockets/ws/blob/master/doc/ws.md. |
keepalive | Integer |
| Keep alive interval, set to 0 to disable. |
reschedulePings | Boolean |
| Reschedule ping messages after sending packets. |
protocolId | String |
| Protocol ID |
protocolVersion | Integer |
| Protocol Version |
clean | Boolean |
| Set to false to receive QoS 1 and 2 messages while offline. |
reconnectPeriod | Integer |
| Interval between two reconnections in milliseconds. Disable auto reconnect by setting to 0. |
connectTimeout | Integer |
| Time to wait before a CONNACK is received in milliseconds. |
queueQoSZero | Boolean |
| If connection is broken, queue outgoing QoS zero messages. |
autoUseTopicAlias | Boolean |
| Enabling automatic Topic Alias assign functionality. |
resubscribe | Boolean |
| If connection is broken and reconnects, subscribed topics are automatically subscribed again. |
publish
With the publish function, you can send a message to a topic. Insert the topic in the first box, the message in the second one and lastly, decide on the options to publish with.
The options need to be constructed as an object, with the highest key being options
with the following three parameters nested inside, as needed:
Parameter | Type | Default | Description |
---|---|---|---|
qos | Integer | 0 | Quality of Service level |
retain | Boolean | false | Whether to retain the message or not. For an explanation of retained messages, see here. |
dup | Boolean | false | Marks the message as duplicate. |
publishJson
The publishJson
function works in the same way as the publish function, but delivers a JSON message instead. Therefore, in the second input field, you should insert a JSON object.
subscribe
With the subscribe
function, you can subscribe to one or multiple topics. If you only want to subscribe to one topic or with a wildcard, insert the topic in the first input box and the qos setting in the second one. If you want to subscribe to multiple topics, ignore the options box and insert an object into the topic input box in the following scheme:
Topic Wildcards
MQTT supports two types of wildcards for subscribing to multiple topics:
Single-level wildcard (
+
): Matches exactly one topic level. For instance,home/+/temperature
matcheshome/kitchen/temperature
andhome/livingroom/temperature
.Multi-level wildcard (
#
): Matches all subsequent levels. For example,home/#
matcheshome/kitchen/temperature
,home/livingroom/humidity
, and any other topic starting withhome/
.
Using these wildcards, you can flexibly subscribe to a range of topics.
onJsonMessage
The onJsonMessage
function needs to be triggered once after the app is started to start listening to events. It then converts the received events into JSON objects.
onStringMessage
The onStringMessage
function needs to be triggered once after the app is started to start listening to events. It then converts the received events into strings.
onBinaryMessage
The onBinaryMessage
function needs to be triggered once after the app is started to start listening to events. It leaves the received events in binary format.
unsubscribe
With the unsubscribe function, you can remove a subscription by inserting the topic name in the input field and triggering.
end
With end
, you can disconnect from the MQTT broker. The disconnect may take a second, but can be forced to immediately happen, without waiting for the inflight messages to be handled, by inserting forced: true
in the input field.
isConnected
isConnected
simply returns true
if a connection to an MQTT broker is open and false
if not.
isReconnecting
With isReconnecting
you can check if the client is currently trying to reconnect to the MQTT broker. A reconnection in progress is indicated by true
.
getLastMessageId
You can output the message ID of the last message sent by the client with getLastMessageId
.
Last updated